What is the set of configured disks used to safe guard data accessed by thin devices?

A. storage pool

B. server pool

C. MAC address pool

D. UUID pool

What is the MTU size for an VMware vSphere ESXi host network adapter using NFS?

A. 1500

B. 5000

C. 9000

D. 9216

A test group no longer needs test resources allocated within the Vblock® System 340. You decommission the resources and delete their specific VLAN on the Nexus 5548 switch. What happens to the ports associated to that VLAN?

A. The ports are up but suspended.

B. The ports continue to forward traffic.

C. The ports are shut down and no traffic flows.

D. The system deletes all the VLAN-to-port mapping for that VLAN.

What information is needed to configure the VSM-to-vCenter communication (SVS connection) for a Nexus 1000V? (Choose two)

A. The data center name in the vCenter server

B. The vCenter server IP address/FQDN

C. The control and packet VLAN Port Group name

D. The UUID of the physical server running VMware ESXi

You want to modify settings in the UCS.

To which IP address should you point your browser?

A. the IP address of UCS fabric extender B

B. the IP address of UCS fabric extender A

C. the IP address of the Vblock® System management switch

D. the IP address of the UCS Manager Cluster

What is the interface used to administer physical servers in a Vblock® System 200?

A. CIMC

B. DCNM

C. UCSM

D. Unisphere

Click the Exhibit button -- Exhibit -

-- Exhibit -What is determined from the output shown in the exhibit?

A. VLAN 112 has been assigned as the management VLAN.

B. Pooling has been configured.

C. The show vlan command has been executed.

D. VSAN 112 has been configured.

You are asked to create a new UCS template for an upcoming project. What information is required for the template? (Choose two)

A. Fully qualified domain names for each UCS blade

B. The World Wide Node Name (WWNN) pool to use

C. The vNIC adapter policy

D. The template UUID

Your company wants to change a new host firmware package in a service profile. What must you consider before completing this task?

A. Host firmware packages do not have adapter settings.

B. Host firmware packages can only be used in one service profile.

C. Host firmware package settings can change network settings.

D. Host firmware package changes might cause the blade to reboot.

You have added physical disks to your Vblock® System 720 to a physical disk group and then created data devices.

What must you do to see the new capacity?

A. Add the devices to the masking group.

B. Map the devices to the front end ports.

C. Add the devices to the thin pool and enable them.

D. Add the devices to the FAST VP policy.