A network engineer is preparing for an office site survey with a height of 2.5 meters. Which three components are recommended to complete the survey? (Choose three.)
A. Use a battery pack to power APs
B. Use a drawing of the office space to draw AP and client placements.
C. Use DoS attack on APs while measuring the throughput.
D. Use APs with directional antennas.
E. Use APs with external antennas.
F. Use APs with built-in antennas.
A customer is concerned about mesh backhaul link security. Which level of encryption does the backhaul link use?
A. hash
B. AES
C. WEP
D. 3DES
Which statement about the 9800 Series Wireless Controller mobility tunnel on a Cisco Catalyst 9800 controller is true?
A. It is an IPsec tunnel with control path only.
B. It is a CAPWAP tunnel with data path only.
C. It is a CAPWAP tunnel with control path and data path.
D. It is an IPsec tunnel with control path and data path.
A wireless engineer is utilizing the voice readiness tool in Cisco Prime for a customer that wants to deploy Cisco IP phones. Which dBm range is the network inspected against?
A. -78 to-65 dBm
B. -72 to-67 dBm
C. -85 to-65 dBm
D. -85 to-67 dBm
How are mobility groups created, excluding mobility anchors?
A. The WLGs do not have to be of the same model or type to be a member of a mobility group, however each member should be running different software versions.
B. A mobility group does not require ell WLCs in the group lo use the same virtual IP address.
C. Each WLC must use the same mobility domain name and be defined as a peer in each other' s static mobility members list.
D. If WLCs with HA SSO are deployed, each WLC in the WLC HA pair is considered separately as a mobility peer.
An engineer is using a Cisco AIR-2702i AP to conduct a Layer 1 site Survey, which mode is selected for the AP to discover non-Wi-Fi interference with metageek chanalyzer?
A. FlexConnect
B. Sniffer
C. Monitor
D. SE-connect
An engineer is conducting a Layer 2 site survey. Which type of client must the engineer match to the survey?
A. best client available
B. phone client
C. normal client
D. worst client available
An engineer performs a Layer 1 survey by using Metegeek chanalyzer only on the current operating channel. Which operating mode is configured for a Cisco CleanAIR AP?
A. Local
B. Sniffer
C. Monitor
D. SE-connect
WLC SSO is set up between two WLCs in a service provider network serving public spaces. On WLC failover, it is noticed that only about half of the original client count is now showing on the secondary WLC, although it is currently showing the role as active. Which design side case explains the issue?
A. The secondary WLC platform does not support the required client count.
B. The WLCs had not completed database sync before the primary failure.
C. SSO is not configured correctly.
D. Some client sessions were in WebAuth-Req state before failover.
A customer uses a Cisco Catalyst 9800 Series wireless controller to manage all of the APs for a campus network. Secure guest access is required for the guest network. A Cisco 5520 anchor controller is deployed within a DMZ. Which design approach ensures that the mobility tunnel is established successfully between the wireless controller and the anchor controller?
A. Run an Inter-Release Controller Mobility compatible software version on the wireless controller.
B. Enable control plane encryption on the wireless controller.
C. Disable data link encryption on the anchor controller.
D. Run an Inter-Release Controller Mobility compatible software version on the anchor controller.