A customer has deployed a Communication Server 100 Rls. 7x system at their site. The technician has been asked to add the Call pickup feature to the 100 IP telephone in the sales department. The customer wants to be sure active calls not lost when the changes are made.

Which Phones Configuration feature can be enabled that will ensure changes to the telephone are not transmitted to the call server until the telephone are busy?

A. Bulk change

B. Courtesy change

C. Group change

D. Template change

A technician on a Communication Server 1000E SA Rls. 7x cannot get a second media Gateway to register with the Call Server. The call server and Media Gateway 1 sit in the same 19 inch rack while Media Gateway 2 is in another building and connected via the computer IP network Media Gateway 2 can ping the Call Server but cannot register. The network is suspected of having a firewall or port blocking issue. Which diagnostic tool will help to isolate and identify a firewall or port blocking issue between the call server and Media Gateway 2?

A. Gryphon Tool

B. Packet Capture Tool

C. Linux PPP Tool

D. Linux Modem Configuration Tool

A technician has just installed and configured a System Manager as the primary security Server and configured a Member Security Server with the Element Manager and Subscriber Manager Applications deployed. The Communication Server (CS) 1000E Rls. 7x Call Server is part of this server security domain. All connections are up and running. When the new CS 1000 Rls. 7x system link on the elements window is clicked, the web browser returns with the following message.

"Destination IP address cannot be reached"

What is causing the problem?

A. The browser window has not been refreshed.

B. The Element Manager is unable to reach the MC32S via the ELAN.

C. The Public Key Certificates for Web SSL were not added in the Call Server.

D. The wrong Call Server IP address was entered during the application deployment.

A technician has installed the Linux base into a commercial of the shelf (COTS) server that will be configured as a Member Server. The Security Configuration is ready to be performed. All LAN connections are in place and functioning normally.

After connecting through a browser, what is the next step to perform the Security Configuration of this COTS Member server?

A. Enter the IP address of the Certificate Authority in the address bar of the browser.

B. Enter the FQDN of the COTS member server in the address bar of the browser.

C. Enter the IP address of Primary Security server in the address bar of the browser.

D. Enter the FQDN of the Primary Security server in the address bar of the browser.

Click the Exhibit button. A customer has added a new Communication Server 1000E (CS 1000E) Standard Availability to their existing network of CS 1000M Single Group system. They are planning to use some of the spare digital telephone on the new system as well as new IP telephone. With reference to system showing three vacant slots, which two components are required to configure the system so that the digital telephone are supported and can communicate with the IP telephone? (Choose two)

A. TMDI Card

B. IP Line Card

C. Digital Line Card

D. CPPM Signaling Server

A customer has a Communication Server (CS) 1000Rls. 7x system and installing a stand-alone CPDC

Signaling Server.

Which role should be chosen during the IP Telephony node Configuration?

A. Backup

B. Follower

C. Leader

D. Alternate

A technician is upgrading an existing Option 11C 5.5 system to a Communication Server (CS) 1000E Rls. 7x Standard Availability with a single media Gateway 1000E chassis. A CPMG Co-Resident Server card is being deployed during the upgrade. This is a stand-alone system that is not part of a larger network so the CPMG will act as its own Primary Server.

Which application should be deployed on the CPMG server for this customer?

A. CS+SS+EM

B. CS+SS+SIPL

C. CS+SS+SubM

D. CS+SS

A customer has Communication Server (CS) RLS. 7x system, and the technician wants to create an account capable of configuring a network Time Protocol (NTP) server.

What must be done to access the data and time parameters?

A. Click the reboot button in Base Manager to restart the system and access the date and time parameters.

B. Update the user role and permission mapping to include security Administrator and Time Administrator access group.

C. Navigate to UCM and click the refresh icon to refresh the screen of properties to access data and time parameters.

D. Update the user role and permission mapping to include Network Administrator access groups.

Click the Exhibit Button.

A customer has asked if the Communication Server (CS) 1000 Rls. 7x system can provide Executive users with the ability to selectively drop people that have been added to a conference.

Based on the print-outs and assuming the CSD key has been programmed and the class of service assigned is CDCA, which capabilities are currently available to the user of extension 2006?

A. The user cannot see the conferee display count or selectively disconnect callers.

B. The user can see the conferee display count and can selectively disconnect callers.

C. The user can see the conferee display count but cannot selectively disconnect callers.

D. The user cannot see the conferee display count but can selectively disconnect callers

Click the Exhibit button.

A technician is asked to review the existing route information for the customer.

According to the printout shown in the exhibit, type of route is this?

A. A direct inward dial route

B. An analog route

C. A media services route

D. An outgoing only route