Click the Exhibit button.

Given the SDRR programming options shown in the exhibit, which SDRR programming would allow a user to dial 1-900-867-3333, but not successfully dial any other 1-900 based number?

A. Table 1

B. Table 2

C. Table 3

D. Table 4

In order to set up the Customer Data Block within Element Manager to support Zone Based Dialing, and assuming Package 420 ZBD Package is installed and active, what needs to be done first?

A. Configure Numbering Zones.

B. Select the Private Dial Plan from the customer's Features page.

C. Select the Public Dial Plan from the customer's Features page.

D. Select the "Enable Numbering Zones" option from the customer's Feature page.

Click the Exhibit button.

Consider a customer's dialing plan and programming shown in the exhibit. Assuming all required Route List indexes have been programmed, why will the station call of 6-544- 3333 not complete?

A. ACI Access Code was not dialed.

B. NXX 544 is not provisioned in the customer's database

C. 3333 is Denied under the SDRR programming

D. AC2 Access Code was not dialed

A customer has deployed a Communication Server (CS) 1000 RIs. 7 x system at their site. They have asked you if the CS 1000 has a feature that can extend and ring calls to other locations. You have decided that Personal Call Assistant (PCA) will meet the customer's requirements and verified that the system is equipped with Package 398, and that it has sufficient ISM parameters. Which step must be performed first when implementing PCA?

A. Locate or configureaSuperloop for PCA

B. Enable the PCA feature for the customer

C. Configure Flexible feature codes for PCA control

D. Configure the telephone parameters to support PCA

Click the Exhibit button.

A customer's dialing requirement, listed below, require that all station users assigned an NCOS of 3 and Class of Service of Conditionally Toll Denied (CTD) be able to place toll calls from the United States to Australia.

Australia Country Code: 61 NCOS of 3 has an FRL of 3 Expensive Routers are not being used

With reference to the exhibit, which table will allow all station users to be able to place these toll calls?

A. Provisioning Table A

B. Provisioning Table B

C. Provisioning Table C

D. Provisioning Table D

When configuring Zone Based Dialing, what option would you select to create new zones for routing calls through a centralized Call Server?

A. Numbering Zones link

B. Bandwidth Zones link

C. Dialing Configuration Details link

D. Dialing Configuration Details for Flexible Dial Plan link

Click the Exhibit button.

A customer has a Communication Server 1000RIs. 7 x system. Telephone users are required to use Basic

Alternate Route Selection (BARS) to make toll calls.

What Class of Service (CLS) adjustment must you make telephone in order to allow the system to use the

telephone network class of service (NCOS) to determine call eligibility?

A. change the CLS entrySRE to CTD

B. change the CLS entrySRE to FR2

C. change the CLS entrySRE to CUN

D. change the CLS entry SRE to UNR

A customer has just deployed a new Communication Server 1000 RIs. 7 x High Availability system. You

have been instructed to configure the required virtual routes to comply with the company's dialing plan

strategy.

Which Feature Package must be enabled to allow virtual routes on the system?

A. Package 147 ISDN Signaling Link

B. Package 148 Advanced ISDN Network Services

C. Package 145 integrated Services Digital Network

D. Package 161 ISDN Supplementary Features

When deploying ESA for IP telephones, a method for determining the location of the IP telephones is required. If you are deploying internally, what would one method be?

A. Deploy ESAPackage 382 (Virtual Office).

B. Deploy Location Information Services (US)

C. Deploy Discovery Manager (DM)

D. Deploy ESA Package 387 (Virtual OfficeEnhancement)

Click the Exhibit button.

You are asked to review the existing route information for the customer. According to the printout shown in the exhibit, which type of route is this?

A. a directinward dialroute

B. amedia services route

C. an integrated services digital network route

D. an incoming only route