Guest access can be provided securely by combining the following components of an Aruba system: (Select two)

A. Use restrictive firewall policies to limit the guest user's access to internal resources

B. Providing guests their own APs and controllers

C. Dedicated APs

D. Authenticate users with the internal captive portal against the internal database or other server

E. DoS guest users off of the system and make them use wired ports

802.11n APs operate in which bands? (Select two)

A. 900 MHz

B. 2.4 GHz

C. 2.4 MHz

D. 5 GHz

E. 5 MHz

What is the IP address of the controller when using the startup wizard?

A. 192.168.1.1

B. 172.16.0.1

C. 10.1.1.1

D. 172.16.0.254

E. 10.1.10.100

When a client is blacklisted, the controller will:

A. Send a message telling the client it has been blacklisted

B. De-authenticate the client from the network but allow it to keep transmitting data

C. Only block the client if it hasn't yet associated with an AP

D. Stop the client from associating with any SSID on the controller

E. Block the client from the SSID he was connected to

The AP Wizard allows the selection of APs to be provisioned using which of the following methods (Select three):

A. APs in particular AP Group

B. All APs

C. APs designated as Air Monitors

D. APs meeting specified search criteria

E. APs of a specific type

Which of the following is NOT available for configuration via startup wizard?

A. Controller name

B. Country Code

C. Loopback IP

D. VLAN IP

E. Firewall Roles

Which of the following cannot be accomplished from the startup wizard?

A. Basic controller configuration

B. License installation

C. VPN configuration

D. WLAN configuration

E. Firewall Roles

Which roles must be configured via the startup wizard when captive portal is being configured (Select Two)

A. Roles are not used on the Aruba system

B. Pre-Authentication role

C. Authenticated role

D. Unauthenticated role

E. The Logon Role

What Controller modes of operation are available from the startup wizard (Select three)?

A. Primary

B. Standalone

C. Master

D. Local

E. Backup controller

FQLN can be set for an AP:

A. During AP provisioning

B. At the factory

C. MSCHAPv2

D. By DHCP when an address is requested

E. Using the AP wizard