Correct Answer: C

The system contains a Storwize V7000 storage system. Each Storwize V7000 single processing unit is a node canister, which is also called a node. The two nodes within their canisters make an I/O group that is attached to the SAN fabric.

Each Storwize V7000 control enclosure requires two Ethernet cables to connect it to an Ethernet switch or hub. One cable connects to port 1 of the left node canister, and the other cable connects to port 1 of the right node canister. A 10/100/1000 Mb Ethernet connection is required for each cable. Both Internet Protocol Version 4 (IPv4) and Internet ProtocolVersion 6 (IPv6) are supported.

Note: For increased redundancy, an optional second Ethernet connection is supported for each Storwize V7000 node canister.

References:http://www.ibm.com/support/knowledgecenter/ST3FR7_7.7.0/com.ibm.storwize .v7000.770.doc/svc_portsandconnect_gen2.html

Correct Answer: B

Correct Answer: A

Three core software components are needed for a successful implementation of VVols. The minimum code level required for each component is provided in the following list:

*

IBM Spectrum Control Base Edition (SCB) version 2.2.1 (or higher)

*

Compatible storage system running IBM Spectrum Virtualize version 7.6.0 (or higher

*

VMware vSphere 6.0 (or higher):

?VMware ESXi version 6.0

?VMware vCenter Server 6.0 or vCenter Server Appliance (vCSA) 6.0 (vSphere Web Client 6.0)

)

We use the term VVols-enabled host to describe a host that meets the following requirements:

*

VMware ESXi (ESXi) version 6.0 or later installed.

*

Registered with the storage system with host type set to VVol. Note that in the CLI, the VVol host type is referred to as adminlun. References: Configuring VMware Virtual Volumes for Systems Powered by IBM Spectrum Virtualize , page 6, page 11 http://www.redbooks.ibm.com/redbooks/pdfs/sg248328.pdf

Correct Answer: A

IBM Spectrum Protect Snapshot (formerly known as IBM Tivoli FlashCopy Manager) uses advanced snapshot capabilities of disk subsystems to create application, database, and VM-aware point-in-time snapshots.

References: IBM SpectrumFamily, IBM Spectrum Control Standard Edition, page 237 http:// www.redbooks.ibm.com/redbooks/pdfs/sg248321.pdf

Correct Answer: D

Correct Answer: A

New functionalities in the Version 7.6 release of SpectrumVirtualize include: HyperSwap GUI support: Current local HyperSwap is functionally complete, but requires complex configuration through the existing command-line interface. This new release of HyperSwap offers a new command-line interface which greatly simplifies the set up process to a handful of commands, and also adds the ability to configure and manage local HyperSwap through the GUI.

References:http://www-01.ibm.com/common/ssi/cgi- bin/ssialias? subtype=caandinfotype=anandappname=iSourceandsupplier=897andletternum=ENUS 215-391

Correct Answer: C

Storwize V5020 control enclosure models offer mid-level performance, scalability, and functionality with:

*

Two 2-core, four-thread processors and up to 32 GB of cache

*

Support for up to 392 drives per system with the attachment ofStorwize V5000 expansion enclosures

*

Encryption of data at rest stored within the Storwize V5000 system

Correct Answer: A

IBM Spectrum Protect Snapshot uses the FlashCopy or snapshot function of the storage solutions for database cloning. This method eliminates downtime and minimizes the impact on the production database.

After you share the FlashCopy repository, configuration and binary files, an Oracle RAC database clone can be created from every node of the Oracle RAC cluster. IBM Spectrum Protect Snapshot can operate on the clone from all RAC nodes, so that a clone created on one RAC node can be inquired, refreshed, or deleted from any other node within the RAC cluster.

References:http://www.ibm.com/support/knowledgecenter/SSERFV_8.1.0/fcm.unx/c_fcmu _orc_cloning.html

Correct Answer: A

Store up to five times as much active data in the same physical space with IBM Real-time Compression. It is supported by the three StorwizeV5000 hybrid models: IBM Storwize V5030, IBM Storwize V5020 and IBM Storwize V5010. References:http://www-03.ibm.com/systems/storage/disk/storwize_v5000/ overview.html

Correct Answer: B

Support for iSCSI backend storage attachment for SAN Volume Controller and the Storwize storage virtualisation family include theDell Equallogic PS6210 storage model.

References:http://www-01.ibm.com/support/docview.wss?uid=ssg1S1006383