DRAG DROP

A customer wants to map an existing volume to a new server connected through iSCSI. What is the correct sequence of steps to complete this task?

Select and Place:

You need to set up the iDRAC IP address on an SC Series controller with the following details:

IP address 192.168.0.160 subnet mask 255.255.255.0 gateway 192.168.0.1

Which commands should be used to complete this task?

A. ifconfig inet set eth0 ip 192.168.0.160 ifconfig inet set eth0 netmask 255.255.255.0 ifconfig inet set eth0 gateway 192.168.0.1

B. ifconfig inet set eth1 ip 192.168.0.160 ifconfig inet set eth1 netmask 255.255.255.0 ifconfig inet set eth1 gateway 192.168.0.1

C. controller ipconfig set eth0 ip 192.168.0.160 controller ipconfig set eth0 netmask 255.255.255.0 controller ipconfig set eth0 gateway 192.168.0.1

D. platform bmc set ip 192.168.0.160 platform bmc set netmask 255.255.255.0 platform bmc set gateway 192.168.0.1

Where are Dell Storage Manager (DSM) automated reports stored for later access?

A. DSM database

B. DSM file system

C. First created volume

D. External document management system

You just installed two SC7020 storage arrays with plans to bring them into production shortly. What is recommended for deploying the Dell Storage Manager (DSM) Data Collector?

A. Install and use the DSM Virtual Appliance

B. Use the embedded database

C. Dedicate 2 GB of RAM to the Data Collector

D. Use an external SQL database

How much memory is required if a customer plans to use the Dell Storage Replication Adapter for VMware with their Dell EMC Data Collector?

A. 4 GB

B. 8 GB

C. 10 GB

D. 12 GB

You recently deployed two SC9000 storage arrays at a customer site one week ago and verified that everything was working correctly with replication. However, the customer notifies you that every time they tested disaster recovery (DR), they lost access to the volumes when the DR array shut down.

Why did the volumes become inaccessible during testing?

A. Asynchronous Replication with Deduplication

B. High Consistency Synchronous Replication

C. Asynchronous Replication with Active Replay

D. High Availability Synchronous Replication

A customer wants to configure their host to use MPIO with Storage Center. What is a requirement for it to work?

A. At least two FC or iSCSI ports per host

B. All host ports must be connected to a single Fault Domain

C. MPIO is only supported on Linux OS

D. This is a licensed feature

A SC5020 has been installed and it is using front-end SAS. There is a problem on Server A and Server B during Controller failover. Each server has a connection in Fault Domains 1 and 2. What is wrong?

A. Servers must have all connections in a single Fault Domain

B. Asymmetric Logical Unit Access (ALUA) is not properly configured

C. SC5020 does not support SAS as the front-end

D. SAS switch configuration issue

You are required to install twenty-four (24) 3.5" 12 Gb disks on a deployed system. Which disk enclosure would support this?

A. SC420

B. SC400

C. SCv320

D. SC460

What is the HDD size that enforces dual redundancy?

A. 2 TB and higher

B. Up to 3 TB

C. 4 TB and higher

D. 3 TB and higher