Building HP SDN and FlexNetwork Solutions: HP0-Y51

Refer to the exhibit.

An HP provision switch has OpenFlow table entries indicated in the exhibit.

The switch should forward most traffic between 10.1.10.0/24 and 10.1.20.0/24 on port 1. However any IP traffic between server 1, at 005056-111111 and

10.1.10.10, and server 2, at 005056-222222 and 10.20.20, should be forwarded on port 2.

Which change to the rules let the switch behave as desired?

A. For flow 3, the table ID is set to 200, and the priority is set to 47000

B. For flow 4, the priority is set to 47000

C. For flow 4, the table ID is set to 100, and the priority is set to 47000

D. For flow 3, the instruction is set to Write Actions output 1

Table of Acronyms Exhibit 1

Exhibit 2 The switches shown in the exhibit are implementing SPBM. The administrator is now setting up interface ten1/0/1 to connect to a new VMware host. What is the correct port type and VLAN assignment for the interface?

A. Trunk port than permits VLANs 101 and 103

B. Hybrid port than permits VLANs 201 and 203

C. Trunk port that permits VLANs 10 and 20

D. Access port that permits the default VLAN

What correctly describes the role of OpenFlow in an SDN solution?

A. OpenFlow regulates the communications among teamed SDN controllers, as well as between an SDN controller and a network infrastructure device

B. OpenFlow integrates the SDN controller into a larger management suite such as that provided in an HP CloudSystern solution.

C. OpenFlow is a communication protocol that an SDN controller can use to control devices at the network infrastructure layer.

D. OpenFlow is the open standard technology that regulates SDN control plane and application plane communications.