Refer to the exhibit.

The exhibit shows settings for a WLAN on an Aruba Instant cluster To which VLAN is wireless user traffic assigned?

A. to the untagged VLAN on switch ports connected to the Instant APs

B. to the VLAN defined for wireless users in Aruba AirWave

C. to the default VLAN defined in the System settings in the Instant

D. to the default VLAN on switches connected to the Instant APs

Which devices must support Multi-User Multiple Input Multiple Output (ML) MIMO) in order for an AP to transmit to multiple clients simultaneously?

A. all of the APs in a WLAN, but none of the clients

B. the transmitting AP and at least one of the clients that receives simultaneous transmissions

C. the transmitting AP and all of the clients

D. the transmitting AP and all of the clients that receive simultaneous transmissions

Refer to the exhibit.

Which type of link aggregation should the network administrator configure on interfaces 1/A1 and 2/A1?

A. a protocol-less trunk

B. an LACP distributed trunk

C. a distributed trunk

D. a static LACP link aggregation

Network administrators manage ArubaOS switches through the CU. What is one prerequisite to enable transfers of completely encrypted config files?

A. Enable the include-credentials option .

B. Install a CA-signed certificate on the switch.

C. Enable TFTPS.

D. Set up SSH.

A network administrator configures LLDP-MAD on an Aruba Virtual Switching Framework (VSF) fabric The administrator needs to enter an SNMP community string after v2c in this command: Swich(config)# vsf Ildp-mad ipv4 10.1.0.2 v2c

Which SNMP community string should the administrator enter?

A. one configured for the VSF fabric on AirWave.

B. one configured on the device at 10.1.0.2.

C. one configured on the standby member in the fabric.

D. one configured on the VSF fabric as a whole.

An ArubaOS switch has no passwords or user accounts configured on it. A network administrator then enters these commands: Switch(config)# password manager user-name admin1 plaintext mysecret1 Switch(config)# password manager user-name admin2 plaintext mysecret2 Switch(config)# aaa authentication local-user admin3 group Level-15 Password plaintext New password for admin3: hpe Please retype new password for admin3: hpe Which users can access the switch CU and use enable and global configuration commands?

A. Admin1 and admin2

B. admin2 and admin3

C. admin1 and admin3

D. admin1 admin2, and admin3

Refer to the exhibit.

An Aruba Instant cluster is added in Aruba AirWave. A network administrator needs to change the cluster management level to Manage Read/Write. The exhibit shows the current status for the cluster. What should the administrator do before changing the management level?

A. Determine why AirWave cannot contact the cluster and resolve any connectivity issues in the network.

B. Check the cluster SNMP credentials and resolve the mismatch between the cluster credentials and AirWave credentials.

C. Investigate why the cluster configuration does not match the group configuration template and resolve any issues.

D. Verify that the cluster is configured with the same shared key that is configured in the global AirWave settings.

What is the purpose of the organization string that is set in the System > Admin settings of an Aruba Instant UI?

A. It configures the SNMP credentials that Aruba AirWave uses to discover the cluster.

B. It directs the cluster to the proper Aruba Activate account for Zero Touch Provisioning (ZTP).

C. It prevents unauthorized APs, which do not have the correct organization string, from joining the cluster

D. It defines the group and folder to which the Instant cluster should be assigned in Aruba AirWave.

What is one benefit of the Aruba Nlobile First Network?

A. separation of wired access management and wireless access management

B. better performance for Unified Communications (UC) solutions such as IVIicrosoft Skype for Business

C. convergence of Ethernet and storage technologies, such as Fibre Channel (FC)

D. integrated support for Amazon Web Services (AW$) cloud services and IVIicrosoft Azure

A company wants all wireless users who connect to a WLAN to authenticate with an individual username

and password. The company also wants to control which wireless devices are allowed to connect to the

WLAN.

Which security option on Aruba APs meets these criteria?

A. WPA/WPA2 Personal and IVIAC authentication

B. WPA/WPA2 Enterprise and IVIAC authentication with the IVIAC authentication fail-thru option

C. Open and IVIAC authentication with a closed SSID

D. WPA/WPA2 Enterprise and IVIAC authentication before 802.IX option