Refer to the exhibit.

Based on the Attribute configuration shown, which statement accurately describes the status of attribute values?

A. Only the attribute values of department and memberOf can be used in role mapping policies.

B. The attribute values of department, title, memberOf, telephoneNumber, and mail are directly applied as ClearPass.

C. Only the attribute value of company can be used in role mapping policies, not the other attributes.

D. The attribute values of department and memberOf are directly applied as ClearPass roles.

E. Only the attribute values of title, telephoneNumber, and mail can be used in role mapping policies.

A network administrator can set the OSPF metric-type on an AOS-Switch to Type 1 or Type 2. What is the difference?

A. A Type 2 metric marks external routes that can be advertised in NSSAs, while a Type 1 metric marks external routes that can only be advertised in normal areas.

B. A Type 2 metric assigns cost 1 to a 100 Gbps link, while a Type 1 metric assigns cost 1 to all links of 100 Mbps or higher.

C. A Type 2 metric is assigned to multiple external routes that are aggregated together, while a Type 1 metric does not permit external route aggregation.

D. A Type 2 metric stays the same as the external route is advertised, while a Type 1 metric increments with internal OSPF link costs.

Refer to the exhibit.

A company has attempted to implement OSPF without success. The devices in Area I need to be able to reach Area 2. Routes should be aggregated for advertisement in other areas. What must be changed to meet these requirements?

A. Change Area 3 to Area 0; remove Area 1 from Switch-2 and Area 2 from Switch-1.

B. Add the 10.2.0.0/16 range on Swttch-1 and the 10.1.0.0/16 range on Switch-2.

C. Add Area 1 and Area 2 on VIAN 100 on both Switch-1 and Switch-2. Remove Area 3.

D. Move the 10.1.0.0/16 range to Area 2 on Switch-1 and the 10.2.0.0/16rangetoArea 1 onSwitch-2.

Refer to the exhibit.

Several interfaces on an AOS-Switch enforce 802. IX to a RADIUS server at 10.254.378.521. The interface

802. IX settings are shown in the exhibit, and 802. IX is also enabled globally. The security team have added a requirement tor port security on the interfaces as well. Before administrators enable port security, which additional step must they complete to prevent issues?

A. Set an 802. l X client limit on the interfaces.

B. Manually add legitimate MAC addresses to the switch authorized MAC list.

C. Enable eavesdropping protection on the interfaces.

D. Enable DHCP snooping on VLAN 20.

An administrator implements the MultiZone feature and uses two clusters that utilize CPSec. A primary and a data zone are created. MultiZone APs successfully build sessions to the primary cluster but fail to establish sessions to the data zone cluster.

What must the administrator do to solve this problem?

A. Enable CPSec in the MultiZone profile for both the primary and data zone.

B. Enable MultiZone booting in the MultiZone AP apboot configuration mode.

C. Add the MultiZone APs to the data zone's CPSec whitelist.

D. Use different AP Group names for the two zones.

Which is a valid policy simulation types in ClearPass? (Select three.)

A. Enforcement Policy

B. Posture token derivation

C. Role Mapping

D. Endpoint Profiler

E. Chained simulation

Refer to the exhibit.

A. mike

B. We can't know this from the screenshot above.

C. Employee

D. john

An administrator supports a cluster of four Aruba Mobility Controllers (MCs) with management addresses of 10.1.100.101, 10.1.100.102, 10.1.100.103, and 10.1.202.181. The administrator accesses an AP associated with this cluster, reboots it and accesses apboot mode. The administrator executes the printenv command. Which AP parameter contains the IP addresses of the cluster members that the AP should use to connect to the cluster?

A. Noodelist

B. Servername

C. Master_ip

D. Cfg_lms

An administrator configures an ArubaOS-Switch for per -user tunneled node. Which protocols does the switch use to establish and maintain a connection with the Aruba Mobility Controller (MO? (Select two.)

A. GRE

B. SSL

C. PAPI

D. IPSec

A company has AOS-Switches deployed at sites with inexperienced IT staff. The main office network

administrators want to track if configurations change on branch switches.

What should be set up for this purpose?

A. an SNMP trap

B. an RMON alarm

C. an auto-config server

D. an lP SLA profile