You must ensure that all management traffic sourced from your Junos devices is set with a specific DSCP code-point value.
Which action will accomplish this task?
A. Apply the DSCP code-point to the [edit class-of-service host-outbound-traffic]hierarchy.
B. Apply the DSCP code-point to the [edit class-of-service interface lo0.0]hierarchy
C. Apply the DSCP code-point in an egress policer.
D. Apply the DSCP code-point to a rewrite rule.
When configuring class of service, what would you use to allocate bandwidth to a forwarding class?
A. buffer depth
B. transmit rate
C. bandwidth
D. speed
You are implementing 802.1X authentication in your Layer 2 network. Each user will have a computer and a phone and you must ensure that both devices are authenticated individually.
In this scenario, which supplicant mode should be used?
A. captive-portal
B. single
C. multiple
D. single-secure
Which type of BGP is used to peer with a different autonomous system?
A. external
B. classless
C. dynamic
D. static
Click the Exhibit button.
Which well-known community needs to be used to restrict 10.0.0.0/8 from being advertised to AS 2?
A. no-publish
B. no-advertise
C. no-export-subconfed
D. no-export
Click the Exhibit button.
During an outage, you review the status of the Q-in-Q implementation on VLAN 300. Referring to the exhibit, what would be the cause of the outage?
A. The S-VLAN is disabled.
B. The VLAN range overlaps.
C. The C-VLANs are disabled.
D. There are no active ports.
Click the Exhibit button.
You are configuring BGP policies for a site with a dual-homed connection as shown in the exhibit. You must ensure that inbound traffic from Internet hosts flow through the ISP A connection.
Which statement is correct in this scenario?
A. Apply a BGP export policy to R2 to prepend [65001 65001 65001 65001 65001] to the AS path of routes advertised to ISP B.
B. Apply a BGP export policy on R1 to assign a lower MED value to routes advertised to ISP A.
C. Apply a BGP export policy on R2 to assign a lower origin value to routes advertised to ISP B.
D. Apply a BGP export policy on R1 to assign a higher local preference value to routes advertised to ISP
A.
In IS-IS, advertising PDUs with the overload-bit has which effect?
A. The local device will no longer be used for transit traffic.
B. The IS-IS adjacencies enter the “new” state.
C. The local device's PDUs are marked with a metric of 65535.
D. The IS-IS adjacencies become passive.
Click the Exhibit button.
Referring to the log shown in the exhibit, what is the problem with the OSPF adjacency establishment?
A. There is an MD5 authentication mismatch.
B. The OSPF database description packet is malformed.
C. The interface IP addresses on the subnet are duplicates.
D. The referenced IP address does not exist on the network segment.
Packets enter a Juniper device and are classified as best effort. During the processing of the packet, the classification of the packets is changed to expedited forwarding by a multi-field classifier. The device is using the default CoS policies.
Which statement is true in this scenario?
A. The packet is forwarded according to the original packet classification, and the DSCP bits do not change.
B. The packet is forwarded according to the new packet classification, and the DSCP bits are rewritten to the new class.
C. The packet is forwarded according to the new packet classification, and the DSCP bits do not change.
D. The packet is forwarded according to the original packet classification, and the DSCP bits are rewritten to the new class.