A manufacturing company is implementing Dynamics 365 Supply Chain Management. The company uses a standard costing model to value inventory.
During the setup of the system, all areas that impact the standard cost of the item must be configured correctly to calculate a complete standard cost by using routing, Bill of materials (BOM) and overhead burden.
You need to verify that all areas of the system are correctly configured.
Which object does NOT impact the standard cost of manufactured items?
A. item group
B. cost groups
C. cost categories
D. BOM formula
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
A manufacturing company has a new speaker that is available with standard and premium carbon fiber options.
For the premium option, speakers are made to order. Customers can choose from seven product attributes at different prices.
You need to create and configure the product and pricing for the new speaker.
Solution: Create a constraint-based product with configurations. Use a price model to calculate the different configurable option costs.
Does the solution meet the goal?
A. Yes
B. No
A company uses production orders to assist with timely inventory delivery to the shop floor.
Inventory items for production orders are not being delivered from the warehouse in time for the production runs.
You need to ensure that the inventory items are available when needed.
Which option should you select?
A. Route card
B. Job scheduling
C. Job card
D. Batch job
A manufacturing company uses master planning in Dynamics 365 Supply Chain Management.
The production planner increases the lead time of an item. On the next master planning output, the planner receives a cancel action message on existing purchase orders. The message includes a suggested earlier date for the planned purchase orders.
The demand for the item has not changed since the original purchase order was placed. Dynamic negative days is not used.
You need to resolve the issue.
What should you do?
A. Increase positive days.
B. Decrease negative days to be less than the item lead time.
C. Decrease positive days.
D. Increase negative days to be greater than the item lead time.
Background
Adventure Works Cycles is a high-end bicycle manufacturer in North America. Their standard model bicycles are available year-round. Limited-edition bicycle models are released several times a year to boutique retailers domestically.
Adventure Works has had the most success with their limited-edition bicycles. These bicycles have high margins, are in high demand, and have a strong following with the younger generation biking community.
Current environment
General
Adventure Works expects to triple their manufacturing capabilities in the next few years due to increasing demand. The company plans to invest in Dynamics 365 Finance, Dynamics 365 Supply Chain Management, and the Power Platform products to migrate from a custom-built enterprise resource planning (ERP) solution and Microsoft Excel worksheets.
Adventure Works sells only to the United States and Canada. Despite their limited market, they cannot keep up with current demand. Over time, they want to expand their market to remain profitable.
Adventure Works has no capabilities or budget to undertake any development beyond Excel formula-level tasks.
Bicycle manufacturing
1.
Bicycle models are measured and reported against how well a single model performs as a sum of all the variations of that model. For example, the Street Kid YOLO model sold 25,000 units in 2019 across all variations of the product, but the Purple Female frame made up 30 percent of that model's sales.
2.
The Street Kid YOLO models sell in different volumes depending on the market.
3.
The creation of production orders for bicycles occurs monthly and is based on historical sales.
4.
Each part of a bicycle's assembly occurs at a different station in the Adventure Works production facility.
5.
A piece of paper that has eight sections accompanies a bicycle throughout the manufacturing process. As each step is completed, the respective section is completed and signed off by a production worker.
6.
The completed paper is used in the put-away process by the warehouse workers.
Financials
1.
The standard model and limited-edition bicycle teams are separate operating units within the manufacturing division. Financials are tracked and reported separately even though they are produced and sold in the same sales channels.
2.
Updates to the standard model bicycle models are created when a part for a bicycle becomes unavailable. This can change the cost of the product.
3.
An updated model of a bicycle with new parts will be maintained as a new item and have a new price. However, it will look like the exact same product to retailers and distributors.
Manufacturing process
The bicycle manufacturing process is shown in the following graphic:
Limited-edition bicycle process
The limited-edition bicycles are made up of an Adventure Works custom frame with all other parts created by local artists and manufacturers.
1.
Each bicycle has a unique set of new items that make up the bill of materials (BOM) because all parts are created to specification.
2.
A single pilot limited-edition bicycle is created as a proof of concept.
3.
Adventure Works occasionally reuses components from existing bicycles, but most limited-edition bicycles are made of handcrafted components designed to specifications.
4.
Each limited-edition bicycle is built, and hand signed by a single Adventure Works artisan.
5.
Sales price must be auto calculated after the cost price is derived.
6.
Before creating the proof of concept limited-edition bicycle, the approximate sales price needs to be determined through a cost-plus 20 percent calculation.
7.
All items except for the frame in the prototype process are considered finished items and can be sold individually.
8.
The frame items require modifications in accordance with the manufacturing process as well as painting.
9.
Each Adventure Works limited-edition bicycle artisan is scheduled to create a specific number of bicycles in a production run that must be completed by a certain date. 10.Limited-edition bicycle artisans work exclusively on a given run of limited-edition bicycles and are not able to work on other tasks.
Limited-edition bicycle BOM assembly process
The prototype process for the limited-edition bicycles is shown in the following graphic:
Requirements
General
1.
Adventure Works will consist of three legal entities: the primary legal entity of the United States (AWUS), sales in Canada (AWCA), and an international expansion (AWIN).
2.
AWIN must be able to sell only standard model bicycles.
3.
AWUS and AWCA must be able to sell both standard model and limited-edition bicycles.
4.
Warehouse workers must use the Warehouse Management mobile application to manage all inventory inbound and outbound from the warehouse.
Bicycle manufacturing
1.
The handlebars, back wheels, and front wheels must not change for any of the bicycle model configurations.
2.
Standard model bicycle production scheduling must be configured to start as soon as possible.
3.
Bicycle components must be automatically reserved when the item is released to the production floor.
4.
Standard model bicycle production must be automatically created on a predefined schedule.
5.
As soon as bicycles are completed, they must be available to fulfill the backlog of orders.
6.
Limited-edition bicycle production must be configured to meet the end date for when the bicycles must be completed.
7.
Production orders need to track financials by standard model or limited-edition bicycle manufacturing teams.
8.
The system must log the immediate consumption of BOMs for traceability.
9.
All inventory is warehouse enabled.
10.Finished goods are reported as finished by the warehouse worker who picks up the finished product from the packaging area.
11.Finished products must automatically have put-away work completed for them.
New limited-edition bicycle process
Adventure Works is creating a new, limited-edition bicycle to commemorate the company's tenth anniversary. The limited-edition bicycle will be designed for charity events and be produced for the summer season.
1.
The bicycle must be available in men's, women's, and unisex frame styles. It will be painted in one of 50 hand-painted designs representing the charity of the customer's choosing.
2.
A limited run of 100 bicycles must be created.
3.
The limited-edition bicycles must use the same production process as the standard model bicycles.
4.
The limited-edition bicycles must use the same parts used for previous limited-edition bicycles, except for the unique paint colors.
5.
Frames must be painted in-house.
6.
Five painting options are available only in the unisex frame style.
New limited-edition bicycle orders
1.
Customers must be able to place sales orders for the item in the chosen frame configuration, including style and color.
2.
When an order for the new limited-edition bicycle is created, payment must be provided.
3.
An approval for an order must exist for the order to be processed.
4.
Upon approval of an order, production must start immediately and not require re-entry of data.
A. Exclusive capacity set to yes and enter a Batch capacity.
B. Exclusive capacity set to no and infinite capacity.
C. Exclusive capacity set to yes and infinite capacity.
D. Exclusive capacity set to no and enter a Batch capacity.
SIMULATION
You are a functional consultant for Contoso Entertainment System USA (USMF).
You need to create a calendar for USMF that uses factory shifts of 06:00 to 14:00 from Monday to Friday.
To complete this task, sign in to Dynamics 365 portal. You must complete Task 1 before completing this task. Task 1 is the creation of the working time template.
SIMULATION
You are a functional consultant for Contoso Entertainment System USA.
You need to configure the system to ensure that the production release to warehouse process either performed manually or via batch.
To complete this task, sign in to Dynamics 365 portal.
HOTSPOT
You are a production supervisor for a process manufacturing company. Item F0001 is the primary source of consumption for item C0001.
Item C0001 has a non-linear consumption pattern. Consumption changes based on varying batch sizes:
You need to update the formula for F0001 to reflect the step consumption of C0001.
How should you configure the formula? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:
HOTSPOT
You need to determine the batch values on the combined mix batches for OperatorA.
Which values should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:
HOTSPOT
You need to configure the system to meet the requirements.
What should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area: